DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 3 L
  • 9 L

INCOVER

Header

professional interior emulsion paint

Interior emulsion paint, ideal for plaster, gypsum board, concrete, brick, etc. A cost effective and reliable solution for professionals. Ultimate hiding power. Suitable for painting and refreshing frequently repainted areas, such as public buildings, ceilings, warehouses. Excellent quality-price ratio.

  • ultimate hiding power & brightness
  • ideal for frequent use
  • uniform matt finish
1
BUILDINGS – INTERIOR USE
matt
Finish
toolsall
TOOLS
INCOVER
THINNING
1-2 hr
DRYING TIME
24 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
11 sin plin 2
m2/L
SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from loose or flaking material, dust, oils and salts.

Surfaces on sound condition:
Apply 2 coats of INCOVER.


New plaster, concrete, brick, cement:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of INCOVER.


New gypsum board or putty:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of INCOVER.


Old water-based or lime paints:
Prime with FERM (H2O) thinned up to 50% with water. Apply 2 coats of INCOVER.

Use

Roller, brush or spray airless. Thin by 10-20% with water.

►        Stir well before use and during application.

►        Allow newly poured concrete to cure for 30 days, then prime with FERM (H2O) before painting with INCOVER.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 2-4 hours.

Practical coverage: 9-13m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for